Build Stands

Brick Vault LEGO accessory kit, packaging design, gray plastic components

1

Your stand will arrive as a stencil, and from there you can ‘pop’ the pieces out. Your package will also contain a bag containing 8 LEGO® studs.

Various black plastic geometric shapes arranged on a light background, including a hexagon, parallelograms, and rectangles with cut-out patterns and holes.

2

The stand is made up of:

  • 1x Base plate

  • 1x Primary upright plate

  • 1x Top plate (some angled sets have 2 top plates)

  • 2x support pieces.

Close-up of hands holding a small gray plastic piece with jagged edges and a small protrusion.

3

Take the two support pieces and slot them into the top and bottom of the primary upright plate.
The fit between the pieces should be tight, and may require a little effort to slot together.

Two hands holding black plastic geometric puzzle pieces with slots and interlocking tabs.

4

Insert the bottom side of the upright plate into the base plate.
The bottom side of the upright plate has the wider ends to help support the weight of a set (see image above).

A person holding a gray 3D-printed geometric piece with holes, next to a freestanding black angular stand on a white background.

5

Insert the upright plate into the top plate - avoid pushing from the base plate on the taller stands as it may bend the upright plate. Instead, push from top of the upright plate, and the support piece.

Close-up of a black lego piece with stud connectors, with a blur of a white and red lego spaceship in the background.

6

Insert the provided LEGO® studs into the top plate, and attach your chosen LEGO® set.

We hope you enjoy your stand, and please send through any photos. We would love to see how you use them!

LEGO starfighter model on a stand